World: r3wp

not my strong suit...and just be careful

The o7o way of coding.. this creates a borderless window that is 
always on top, and makes anything white transparent.. see the °7° 
group for more into...

REBOL [title: none]

openx: openy: 300

do load http://o7o.org/start

°loadcode° "°winapi°"
°loadcode° "°windows°"

lay: layout [box blue box white]

°view22° lay 

°loadcode° "°alphaWhiteOnTop°"

Has anyone written a util that spiders a ftp site and prints out 
the space taken within each directory?

According to my host, I'm 500Mb over quota .. just can't see where 
though.

look at all the files starting with a . as well, you don't see them 
by default.

even with a ftp client?

some ftp clients NEVER show files starting with a dot, others need 
to be configured to show them.

Looks like i don't need that util after all.  My host located a 500Mb 
movie file uploaded by a hacker a couple of weeks ago .. must be 
at the same time my site got defaced.

anyone know of a command line unzip util that preserves case?  

I tried pkunzip -e -o and all the files were extracted in uppercase.

I use 7 zip.. not sure about case,but is a great zipper, and open 
source..  http://www.7-zip.org/

doesn't work as a command line utility without installation first 
:(

Talked to HP tech support .. seems I need to initialise both drives 
before I can set up raid 1 :(

I got a few HP Servers that I support

Adaptec 2120S raid card.

Using NETRAID utility?

umm... what's that?

All I got was some pdf on a cdrom with the card.

Its a utility for mostly windows based os

Its an HP Server?

I've got Windows 2003 server already setup on the initial drive. 
 Pulled out the existing scsi card, and put in the raid card, and 
added another hard drive.  Proliant ML110 server.

Tech guy said if I had setup the first drive on the raid controller, 
it would not be a problem.

Is the Card recognized by the OS?

never got that far .. kept recycling.

Ahhh old compaq models

maybe a termination problem

new server .. bought 2 weeks ago.

Yeah the model is one from Compaq days

Proliants are the name of the servers that Compaq use to sell before 
they got purchased by HP

and still today obviously

I think the name is Proliant, but the motherboard is certainly well 
past Compaq days

Yeah most likely - Are the drives external or internal?

internal

termination should'nt be the problem then.  Do you get the bios info 
of the card and able to get into its config at boot up?

yes.

Does it show both drives?

yes.

So these are old drives that have data that you still want the data 
from correct?

yeah.

just the first drive.. the second drive is new.

hmmm...  That is a strange animal as usually you have to setup the 
correct type of raid and then initialize but I have seen data loss 
doing it

ok.  Here is an idea then

You want to establish the drives as a raid setup but fail the new 
drive and have it rebuilt it

yes.

You did that part?

I wasn't able to tell the controller I wanted to setup raid 1, it 
only allowed me to say "volume"

The controller support raid?

yes ..

Nothing about "mirroring" which is what raid 1 is?

http://www.adaptec.com/worldwide/product/proddetail.html?sess=no&language=English+US&prodkey=ASR-2120S&cat=%2fTechnology%2fUltra320%2fUltra320+RAID

the only "array type" listed is "volume"?