World: r3wp

You doing all your configuration from inside windows?

never got to boot up Windows

You might try from CTRL-A at boot up when the SCSI bios message apears

keeps recycling.

I can configure the raid card using ctrl-A

Yeah that is what you need to do

I think I'll bite the bullet and backup, rebuild the array, reinstall 
Windows 2003, and then restore :(

Yeah do the backup regardless but I would suggest before you go further 
than that - that you try and clear the NVRAM of the card and wipe 
the disk config and rebuild both and try not to initialize unless 
it forces you to.  Then fail the second drive and see if you can 
rebuilt it then.  But get the backup first.

how to clear the nvram?

When I say wipe the disk config there should be an option to write 
config to disk in the utility and that will do the wiping of the 
disk config.

ok, I"ll look at that tonight.

The utility probably has an option to clear its configuration

Just remember this.  That is usually write a config to the disk itself. 
 This is how it knows what slot or position the drive is even if 
you move them around.  But the NVRAM is on the card and usually backed 
up by battery power to retain the configuration (you need to blow 
that away).

no battery so I'll just remove the card.

Hmm..

Ahhh that one has an (optional) battery module.

That means it completely using the config of the drive and thats 
why it detects it automatically as a volume.  You most likely wont 
be able to change that then without a special tool from them since 
you would need to force a write to the drive config to show that 
its drive 0 of array 0.

I'll see if I can see if they have some tools I can download.

Good luck.  I know how frustrating that can be.

how long has the latency been running on the mailing list.  I posted 
earlier and my post still didn't show up.

I posted yesterday morning and nothing so far.

We need Selma back.  Selma was better than this.

It may not be ecartis but their mail server that is the problem.

Selma had her off days too:

http://www.rebol.org/cgi-bin/cgiwrap/rebol/ml-display-message.r?m=rmlHFFB
Or, as Graham suggests, it's RT's mail server

my message reached the list at http://mail.rebol.net/cgi-bin/mail-list.r
but didn't get out again back to me.

I lost one yesterday too, in the same way.

It all seemed to be working okay for a week or two, but is slipping 
again now.

Anyone have rebol highlight files for PSPad?

I'm playing around with mediawiki .. a great little wiki.  Even has 
preferences for your time zone so that you can see when edits were 
done according to your own local reference.

Would be great if such a wiki could be done using Magic.

I've questioned this a few times over the years now.. 

If we have a CGI script that uses the mysql protocol, is it necessary 
to load this protocol with every cgi request?  Wouldn't that add 
some burden to the server?

you probably have a pool of connections which are re-used

forinstance, in Zope, I have a single sql connection which is used 
by all the "cgi" requests.

But if you want to access a mysql server, the cgi script loads each 
time, right?

loads the mysql protocol, that is.

depends on how it is written.

can you give me an example of a cgi script that access a db, and 
doesn't load the protocol each time?

any Zope cgi script that access a database does that.

I'm referring to Rebol

if I have a rebol daemon running that has a connection to a odbc 
database, then my rebol cgi script an interact with that.

via what, tcp?

yes

Well, I wonder what has less overhead.. reading a 23kb protocol with 
each call, or taking the time to do a tcp call?

clearly the latter

my portal does this .. keeps an open sql connection which is used 
by incoming requests

what do you use, rugby?

yes.

What is faster, reading a 100 byte text file, or accessing 100 bytes 
from a DB?

you would have to do timing studies on questions like this ...

Yeah, just doing that now.

after a text file being read from a directory is another db operation.