World: r3wp

You misunderstand - the bug is not because the series index is at 
the TAIL, it is because the copy/part RANGE is -2147483648

To be clear ;  when the copy/part RANGE is *negative* it copies *backwards* 
from the series index.  This is useful, but not well known, I think.

Anton is right:

>> copy/part at [1 2 3 4 5] 4 -3
== [1 2 3]
>> copy/part at [1 2 3 4 5] 4 -2147483647
== [1 2 3]
>> copy/part at [1 2 3 4 5] 4 -2147483648
== []

#4216 is still valid with REBOL/View 2.7.5.3.1 3-Jan-2007
always corrupt datatype:  ..  at 201

Does the message helps my XP wants to send to MS?

not sure, but maybe there is a cache listing ....

imo if it is reproducable, then RT can debug it, even without any 
further info ...

sqlab, I don't get any error on 2.7.5.3.1:
>> get-modes s: open tcp://:87 'port-modes
== [read write binary lines no-wait direct]

hi, did anybody notice, that sometimes

    a-value: make port! http://

works, while sometimes is end up as follows:

** User Error: No network server for HTTP is specified
** Near: a-value: make port! http://

it ends up
 - sorry for spelling

the first result can be obtained e.g. by starting a fresh REBOL console 
first and then type in the expression

the second one can be obtained in Windows by defining a Do action 
for .r files as follows:

    C:\Rebol\sdk-2-6-2\tools\rebview.exe "%1"


and then right-clicking on a file containing just a REBOL header 
and the above mentioned expression and picking the Do command

So does the second way always produce the error ?

I don't seem to have the option to create a Do command in WinXP SP1

ladislav, could it be that the second way skips user.r and thus does 
not set a default network server?

ie. can you verify a set-net is being executed before that?

checking

indeed, Gabriele, if I make sure set-net is executed, the problem 
does not occur

Anton - I am using WinXP SP2, but I am positive that it is possible 
in SP1 too

you can define the action in Windows explorer, check registered file 
types

ok, so it's not really a bug; it's just that when you have a default 
network server, rebol uses that for any protocol. (set net does not 
actually set the smtp server; it sets the default server. since the 
send function does not specify any server, the default server is 
used to send email; that's why the default server is normally set 
to the smtp server)

thanks

what do you think about this:

    0:0:0.1 = 0:0.1 ; == true

doesn't it look strange?

Very, considering 0:0 defaults to hours:minutes -
>> 0:0
== 0:00
>> 0:0.1
== 0:00:00.1

hmm... you can have decimal only for seconds... so i guess rebol 
tries to make sense of 0:0.1 by assuming you meant 0:0:0.1

Maybe it should convert 0:0.1 into 0:0:6 ?  IIRC, Ti calculators 
do that when working with degrees/minutes/seconds...

0:0 is ambiguous. rebol normally takes that as hours:minutes because 
it's the most common case ("it's 10:07 am now"). but when you write 
1:0.7, rebol can see that you probably meant minutes:seconds, so 
it interprets it that way.

if the format was something like 10h12m3s, then you could write 0h0.1m 
and it could be taken as 0:0:6.

anyway, i guess Carl will change it to whatever is the most useful 
for people, so if most people think that 0:0.1 should mean 0:0:6 
he will probably change it.

I'm not sure I'd change the time... the above, as explained by Gabriele 
is what is happening, and its very logical... the dot is consistent. 
and fixes the inconsistency of  0:10:0 and  0:10 being the same thing.

this is a copy of a fresh REBOL interpreter console. Do you think 
it is covered by the documentation, or should I put it to RAMBO?

>> a: make string! 15
== ""
>> insert a "a"
== ""
>> a
== "a"
>> str: make struct! [s [string!]] reduce [a]
>> str/s
== "a"
>> insert/dup tail a "b" 14
== ""
>> a
== "abbbbbbbbbbbbbb"
>> str/s
== "a"
>> recycle
>> str/s
== "¸^D^G^A"

if we wanted to support decimal minutes and hours, I'd suggest that 
time then support using decimal values in all parts of a time like 
so:

0:.1:00
0.2:00
0:0.25:0.124


then we'd be forced to write 0:0:0.124 and the inconsistency would 
disapear.  a part from the above discrepancy in that you don't have 
to supply seconds

Regarding the decimal point in time value issue - my POV is, that 
if users find it natural, then there is no need to change the behaviour

I find the current time is adequate in all scripts I've done so far... 
it just has to be documented... if it currently isn't

I also find that all types should be described within a convertion 
matrix.

row/column of values with equivalent outputs in all other types.

Ladislav, why is the str/a corrupted after a recycle?

my interpretation: a is relocated to be able to grow and STR does 
not "protect" the old memory while still referencing it

I guess I should put it to RAMBO, because it is not covered by the 
STRUCT! documentation

ybut the size is within the 15 bytes you asked at a's outset no?

yes, that is another issue - due to an INSERT quirk you need to allocate 
17 places to make sure 15 elements fit in

(already in RAMBO)

and in any case, the reduced "a" is separate (copied) and in ram 
is probably equivalent to a: make string! 1...  so I guess the real 
bug is that structures do not properly identify regions of ram they 
point to.

<shudders> in my spine... if this is the case !

reduced "a" is not copied...

you can make sure by inserting less elements (say 2)

I have written 4 replies to the above, and everytime, I remember 
another detail about struct which is not obvious... and in all cases, 
I come back to this being a GC bug IMHO.

(replies I never sent... since they didn't identify another possibility 
when the sentence was finished)

aha :-)

(and you are right, the reduced "a" is not copied. if you change 
the first letter, then str/a is also changed)

I looked quickly at the code... and tought I'd seen rejoin somewhere 
;-)