World: r3wp

Nevertheless, the "use your own constructor" variant is the only 
"truly object-oriented" one

yes, my above one-line constructor func scales very well, since you 
can call new on sub-objects too, and it will take care of any things 
like creating empty new blocks and formatted strings on the fly, 
within the init func.

My suggestion would be more like:

my-class: make object! [
    new: func [...] [...]
]

my-class-instance: my-class/new ...

, but, you can use whatever suits your needs

yes, the power of rebol to define our own models  :-)

How is it again that one decodes a url? Sometimes I forget the simple 
things.

dehex ?

thanks

Is there something like "unmold"? I find myself needing to return 
a molded block back to a block all the time.

load

dope

remember to MOLD/ALL if you don't want to lose information.

I have r2 question.  I wont to convert integer value to binary but 
it comes out wrong.  Some tell me how?  The integer is above 255.

Tell us what you are doing

I trying to convert integer value to binary.

>> debase/base to-hex 512 16
== #{00000200}

thx you Izkata.

Dope doesn't work that well.

I think, that everybody processing REBOL strings using REBOL shall 
be aware of CureCode #1632. I should probably write an article about 
the subject somewhere to make life of at least some people easier.

Yes, it's a pity MOLD isn't the one which is the least "lossy" (vs 
MOLD/ALL) when it comes to serialising.
What can be done about it at this stage, though?

thing is load isn't the counterpart to mold.  'DO is.   and even 
then, even MOLD/ALL isn't a real serialization because shared objects, 
or series aren't shared anymore.


although they go a long way, and I have been using them extensively 
in many tools, MOLD & MOLD/ALL are just helpers, destined for advanced 
users who have very special requirements.

we need to build a REAL serialization dialect, one which rebuilds 
the data sharing, even in nested and co-occuring references to series 
and objects.

it's rebin

but we should not be forced to use a binary dataset for such things. 
 it can be expressed in source format.

just added an (very succinct) extended serialization example which 
would allow us to basically fix all the MOLD issues on LOAD directly. 
 it could be the basis for rebin, which could just be a compressed 
version of the source version to keep it (very) small.

just added ?

to curecode.

as usually, all datatypes would need to support this extended format, 
but since it would be managed directly within the native datatype 
handling it would be MUCH faster than if we tried to build some dialect 
for it in REBOL.  especially since the native has much more direct 
access to things like same?, and internal states like series index.

I have done some work on this to support reloading of shared & nested 
objects specifically and its easy enough to do (for me ;-), but it 
requires some deeper understanding of REBOL.


I agree with Ladislav, though, that serialization should be addressed 
more "completely" at some point, directly within the language. 


IMHO, The current implementation isn't a "bug" but rather an annoying 
limitation which has been known and put off as a "to do" for years, 
by everyone which is capable of solving it.

(cause its a very tedious and "not fun" thing to do)

also, there are nasty binding issues on serialization...  things 
like:

---------------------------------
a: "data"
f: does [print a]
o: context [
	a: "other data"
	f: does [print a]
]
set in o 'f :f
---------------------------------


how is this treated in MOLDing ?  these are hard cases to choose 
from a variety of paths, if we serialize only the o  object, then 
its f method is pretty much broken in current REBOLs.   

how would we handle this?  there are a lot of ways to play with the 
above, but no single method will ever cover all possibilites.  


so in the end, the serialization will never be "perfect", unless 
all data items are signed with a unique key which is retrievable 
at run-time and reusable at each interpretation (pretty much impossible).


IMHO all we can do is properly document  what can and cannot be serialized 
without risk of data corruption.  Currently, official & explicit 
documentation on this is vague at best.

Max, I had a specific issue in mind: (pre)processing of REBOL scripts. 
In that case, you we not need to worry about such issues as binding, 
shared objects, etc. I am quite comfotable with MOLD, since it does 
not look like a gotcha to me (not that I want to repeat that "MOLD 
is not a counterpart to LOAD" mantra), but SAVE clearly *is* a gotcha, 
since nobody sane would expect it to "distort" REBOL script when 
saving REBOL code obtained as a result of LOAD.

you we not
: "we do not"

in R3, there is save/all which stores in serialized format, which 
might solve that particular case (saving a whole script)

{I agree with Ladislav, though, that serialization should be addressed 
more "completely" at some point, directly within the language.} - 
I do not need that, especially not in this case; but I do want to 
help people to not get caught by the bad design decision making SAVE 
inadequate for the task it is supposed to perform.

actually it seems even R2 has /ALL refinement.

Yes, that is not a problem, problem is, that almost everyone would 
expect SAVE to be adequate.

Ceterum censeo Carthaginem esse delendam

 - the SAVE function (especially in R3) should work as SAVE/ALL does, 
 while the "gotcha functionality" should be discarded.

but SAVE/ALL will distort the output such that many values such as 
true and none  will be written in their serialized (and ugly) format 
of #[true] and #[none]  so that is not optimal either.

Are you kidding? Try to load any script and save it

if you use SAVE/ALL you obtain the code, that is as close to original 
as possible

Maxim:
>> mold/all load "foo: none"
== "[foo: none^/]"
no distortion here

...and, being at it, what does that "ugly" mean?

aahhh yes... loading doesn't convert the word tokens to their values, 
so they do not get converted to #[none]... they are still words... 


though all the comments disapear... which is understandable in this 
case.

serialized

 is an inadequate notion as well, would you call "0.10000000000000001" 
 "serialized"?

#[true]

 is a normal REBOL syntax, since REBOL is a language, and LOAD as 
 well as Lad recognize it.

:-p

yes, but its the "mechanical" syntax which is meant for the interpreter, 
not humans... Part of the reason I use REBOL is that I don't have 
to use machine syntax.

if you had a pre-processor which converted all none to #[none]... 
first thing I'd do is stop using your tool   ;-p

mechanical

? - it is the only syntax allowing me to write a logic! type value 
in using the Data exchange dialect. There is no other way how to 
do it.