World: r3wp

Thanks guys

here is some code I have been working on (commented) but the start 
button is busted I want it to call the area box with the discalimer 
details & 2No further buttons, one to quit "Disagree" which is a 
quit command & "Agree" I want to CLS the page & start a fresh copy 
of the XP simulated window, the start button would then open a different 
menu here is the code (its not very elegant I'm afraid):

  rebol [Title: "SOS-XP"]
  view layout [

  ;makes a gui window 768x576 with a simulated desktop (xP blue) with 
  ibevelled border.
  image center %DT.jpg 768x576 ibevel pewter 6x6

  ;creates an area text box color red with disclaimer message & 2No 
  buttons "agree" & "disagree"

  ; which hopefully will be situated in the XP destop when the start 
  button is clicked.
  disclaim: [at 200x300

  area wrap font-color white {You use this program & batch files entirely 
  at your own risk,
due to the myriad of hardware/software configurations I cannot
without any certainty claim that you will not damage your system!
Always Always Always make a full system backup of your partition
before attempting to use SOS-XP & that you have tested the back

up so your are positive in your own mind you can make a recovery!} 
red bold 
  at 240x410 button "Agree"
  at 450x410 button "Disagree"]
  ; this is the simulated XP start button
  button gray 50x30 "START" [disclaim]

  ; this is a small vertical button to make the xP start button look 
  more realistic.
  at 75x605 button gray 3x30

  ; this is a digital clock to simulate the destop clock bottom right 
  on screen.

  at 750x610 text "00:00" rate 1 black ;effect [gradient 0x1 0.0.150 
  0.0.50]
  feel [engage: func [face act] [face/text: now/time  show face]]

]755x650  rebol [Title: "SOS-XP"]
  view layout [

  ;makes a gui window 768x576 with a simulated desktop (xP blue) with 
  ibevelled border.
  image center %DT.jpg 768x576 ibevel pewter 6x6

  ;creates an area text box color red with disclaimer message & 2No 
  buttons "agree" & "disagree"

  ; which hopefully will be situated in the XP destop when the start 
  button is clicked.
  disclaim: [at 200x300

  area wrap font-color white {You use this program & batch files entirely 
  at your own risk,
due to the myriad of hardware/software configurations I cannot
without any certainty claim that you will not damage your system!
Always Always Always make a full system backup of your partition
before attempting to use SOS-XP & that you have tested the back

up so your are positive in your own mind you can make a recovery!} 
red bold 
  at 240x410 button "Agree"
  at 450x410 button "Disagree"]
  ; this is the simulated XP start button
  button gray 50x30 "START" [disclaim]

  ; this is a small vertical button to make the xP start button look 
  more realistic.
  at 75x605 button gray 3x30

  ; this is a digital clock to simulate the destop clock bottom right 
  on screen.

  at 750x610 text "00:00" rate 1 black ;effect [gradient 0x1 0.0.150 
  0.0.50]
  feel [engage: func [face act] [face/text: now/time  show face]]

]755x650  rebol [Title: "SOS-XP"]
  view layout [

  ;makes a gui window 768x576 with a simulated desktop (xP blue) with 
  ibevelled border.
  image center %DT.jpg 768x576 ibevel pewter 6x6

  ;creates an area text box color red with disclaimer message & 2No 
  buttons "agree" & "disagree"

  ; which hopefully will be situated in the XP destop when the start 
  button is clicked.
  disclaim: [at 200x300

  area wrap font-color white {You use this program & batch files entirely 
  at your own risk,
due to the myriad of hardware/software configurations I cannot
without any certainty claim that you will not damage your system!
Always Always Always make a full system backup of your partition
before attempting to use SOS-XP & that you have tested the back

up so your are positive in your own mind you can make a recovery!} 
red bold 
  at 240x410 button "Agree"
  at 450x410 button "Disagree"]
  ; this is the simulated XP start button
  button gray 50x30 "START" [disclaim]

  ; this is a small vertical button to make the xP start button look 
  more realistic.
  at 75x605 button gray 3x30

  ; this is a digital clock to simulate the destop clock bottom right 
  on screen.

  at 750x610 text "00:00" rate 1 black ;effect [gradient 0x1 0.0.150 
  0.0.50]
  feel [engage: func [face act] [face/text: now/time  show face]]

]755x650

Oop,s tripple posted how do you delete I will satrt again

You can't delete, but that's ok.

I will have to be more careful sorry!

so, the area is supposed to be hidden and then be displayed when 
you click start?

Indeed yes, the area or box will contain the disclaimer details + 
the two additional buttons Agree & disagree yes

called from depressing the [START] button

Bit like the way Windows works but obviously this is a simulated 
approach

however when I click the [START] button nothing happens its busted

ok, showing and hiding faces are done with SHOW and HIDE. Example:


view layout [button "Start" [either a/show? [hide a][show a]] a: 
area]

in your code, you are writing button "Start" [disclaim], but there 
is no actual face set to that word.

I guess what you need there is:

disclaim: panel [at ...]

not:

disclaim: [at...]

ahh so panel is a function to kick start the reamining block of text 
+ Buttons?

Henrik is just ahead of me --- you have disclaim as block.

Also, maybe when getting started, dont worry about the absolute positionings 
(they'd need to be adjusted according to screen resolution anyway). 
This simplification of your code works for me: (note the unview/all 
to remove any previous instances):


  rebol [Title: "SOS-XP"]
  unview/all
  view layout [
  across
  
  disclaim: 

  area wrap font-color white {You use this program & batch files entirely 
  at your own risk,
due to the myriad of hardware/software configurations I cannot
without any certainty claim that you will not damage your system!
Always Always Always make a full system backup of your partition
before attempting to use SOS-XP & that you have tested the back

up so your are positive in your own mind you can make a recovery!} 
red bold 
   return
   button "Agree"
  return button "Disagree"]
  return
  button gray 50x30 "START" [disclaim]

  ; this is a small vertical button to make the xP start button look 
  more realistic.
  return button gray 3x30

  ; this is a digital clock to simulate the destop clock bottom right 
  on screen.

  return text "00:00" rate 1 black ;effect [gradient 0x1 0.0.150 0.0.50]
  feel [engage: func [face act] [face/text: now/time  show face]
]

I cobbled this together from the beginners tutorial stuff & glued 
it together

Copying is sometimes the best way.

There are some stray ]s in the code I just posted.....Sorry. This 
below really does work:


  rebol [Title: "SOS-XP"]
  unview/all
  view layout [
  across
  
  disclaim: 

  area wrap font-color white {You use this program & batch files entirely 
  at your own risk,
due to the myriad of hardware/software configurations I cannot
without any certainty claim that you will not damage your system!
Always Always Always make a full system backup of your partition
before attempting to use SOS-XP & that you have tested the back

up so your are positive in your own mind you can make a recovery!} 
red bold 
   return
   button "Agree"
  return button "Disagree"
  return
  button gray 50x30 "START" [disclaim]

  ; this is a small vertical button to make the xP start button look 
  more realistic.
  return button gray 3x30

  ; this is a digital clock to simulate the destop clock bottom right 
  on screen.

  return text "00:00" rate 1 black ;effect [gradient 0x1 0.0.150 0.0.50]
  feel [engage: func [face act] [face/text: now/time  show face]]

]

Yes sunanda that is nearly there but I am trying to retain all the 
background stuff/Gui the discalimer box pops up on depressing the 
[start] button in fact the discalimer stuff overlays the previous 
gui stuff

I copied your code into rebol/view & ran it to see?

I thought the XP simulated look & feel would make it easy for users 
to use the program

Sorry about messing you UI up! As Henrick says, you need a pane and 
to work with swapping between different panes.
Tutorial here:
http://www.rebol.com/how-to/subpanels.html

I used the postioning to force the overlay effect is that the right 
way of doing things?

Kewl much oblighed

I will read up on "panel" also

Many thanks Henrik

no problem

<I copied your code into rebol/view & ran it to see?>

A possibly simpler way is to copy it into the Windows clipboard, 
then this line in the View console:
     do read clipboard://

yes thanks

tried with the a combination of panel & unview/all then in this line 
of code:

button gray 50x30 "START" [view disclaim] -> inserted view but the 
start button is pushed to the top right of the screen/Window the 
[Start] button now closes the XP lookalike gui, opens the discalim 
area in a black box?

half off the page

or monitor screen should I say

but at least the [Start] button now works kewl

I will just have a read of the subpanel info link you have provided 
Sunanda BRB

(they'd need to be adjusted according to screen resolution anyway) 
this is interesting so waht  could be ok on my screen setup could 
be completely different on someone elses Umm

Screen resolution is easy to get.....And it may be your first foray 
into the 'system object:
      print system/view/screen-face/size

(easy to get, hard to find :-))

True ....I looked at the code when I last used it, otherwise, it 
would have been a long trek through the system object to remember 
the location :-)

IC type the  print system/view/screen-face/size into the Rebol/view 
interpretor & spits back at you your screen res

David, you should take some time to explore the SYSTEM object. It 
is huge, but contains valuable information regarding the REBOL runtime 
environment.

K is that info in the begineers tutorial as I do not recollect seeing 
or remebering it

found this http://www.rebol.com/faq.html

You can explore it with a small application called ROAM in the Desktop

I am going to have to disapear for a while dogs need walking again 
& wife wants shopping from town groan domestic choars LOL! Henrik 
thanks!

A good learning curve, David, might be to adapt the subpanels example.

Once you have sets of controls appearing in the subpanel to your 
satisfaction, you could then go on to do the set dressing:
-- styles and absolute positioning to mimic Win XP
-- default size depending on user's monitor
Then start adding the real functionality!

LO tis me back

The end game is to create a series of routines that will cut a full 
install of XP from Approx 1.5 gig installed to approx 212 mb's specifically 
geared for diagnostics and repair.

Another approach I have been thinking about but will need to be a 
future project when I get some mileage under my belt so to speak 
is to use rebol/view in a similair manner to Limnor (Limnor is basically 
codeless programming) I know was my mouth out with soap & water However 
for newbie's/Lamers like myself if a gui was presented that had most 
of the functionality of rebol/view like field boxes buttons to create 
standard buttons & other routines etc. on the right of the screen 
would be a editor that as the selections was made would build the 
code automatically thus giving the user an illustration as the code 
progressed. in the bottom below the editor could be a help menu that 
would instruct the user as the code was systematically built. something 
like if the mouse cursor hovered over a gui item it would flag up 
instruct info, a help as you go if you like. The program could be 
nearly full gui leaving the task bar available to the user to continue 
having access to windows items. The 1st item could be a field that 
the user inputted a title then work through the items to build a 
gui interface. It would be no good for the experienced rebol user 
 who needs full control of the coding but would give new users a 
kick start to build confidence. You could call it RoboRebol LOL! 
I'm getting ahead of myself but is a concept idea that I think may 
have merit. You guys would have to advise on the practicalities of 
such a venture. Use Rebol/View gui to semi auto write rebol programming

I think it would be a helpful aid for teaching but would also be 
attractive for the new user He or She would see how the code was 
compiled as they progressed

A number of REBOLs write code generators and tools for specific purposes 
along those lines. There have been a few forays into REBOL IDEs as 
well, but none have gone too far. The topic never goes away though. 
R3 has more features for Programming-in-the-large, so it will surely 
come up again.

Kewl others are on the case