World: r3wp

I can guess, but I need to know how to know for sure.

I think I can work it out

? f shows offest    & ? f/offset shows F/OFFSET is a pair of value: 
479x202
I guess that is as much as I can find out about offset?

yes, offset is just a pair which positions the upper left corner 
of the face. nothing else.

so I suppose the slider must have some exposed face I could find 
if I keep hunting

it's jumping a little far, but essentially the face tree I talked 
about is where the slider would be.

if you make a layout with VID, a set-word! would allow you to reference 
a single face:

view layout [
	button
	field
	s: slider
]

escape to console

? s

brings up the slider face.

is there a list of documented featurs so I can try to avoid using 
the undocumented ones like Slider please?

Or is the graphics stuff really an experimental addon?

It's not experimental, but just not very well documented. I suggest 
you try the VID style tree in the REBOL desktop under REBOL/REBOL 
Tools.

It dosnt work.  it just says
missing file
http://www.codeconscious.com/rebsite/vid-ancestry.r

It works fine here in REBOL/View 2.7.6.

are you connected in the lower left corner?

REBOL/View 2.7.6.3.1

it says local.

Click the "local" text and it will connect and allow you to download 
the script.

In that script you can see the style tree, all styles available in 
VID. Click on the style will give you the source code for that style.

That is very good... I was wondering if there was a tree type view 
of some of the functions in Rebol.

After this, probably go to Demos and Easy VID, for a simple VID tutorial 
(unfortunately it was never completed, but it has good parts)

Thanks for your help again :-)  I can see I could spend hours looking 
at the tree view alone...

I had a quick look at the view top when I first instaleld it, but 
it was all too advance for me then, and then I forgot that it existed.

I have studied all the information about VID that I can find, for 
2 hours mostly trying to find out how to use a slider that is shown 
horizontaly, rather than verticaly but I cant find where this is 
described.  Have deliberatly not asked how I do this because I want 
to learn how to find the answers to these sorts of questions myself.. 
Without telling me the answer directly, can anyone suggest how I 
should learn to find this information for myself please?

there is another VID base doc, simpler, might help you start.

http://www.rebol.com/docs/view-guide.html

honestly, I literaly learned all of the VID tricks my doing this:

probe face

where face is any face you have setup in a layout.

ex: 

layout [
	my-btn: btn "ok"
]

probe my-btn

I still use this quite often.

I'd say learning to build new styles with the stylesheet system is 
the first big boost in productivity.  this will inevitably leed to 
you wondering how you can change this or that, and then by probing 
the face and looking at its code, you see that some values are being 
reset in the event handler... which is quite annoying.


the seconf big boost is to try and understand the event system.  
the view reference link that henrik gave you earlier is the best 
resource online.

and rebol, as a language is extremely easy to search on the net... 
you start any search on google with the word REBOL  and you'll end 
up with mailing list chats, altme pages, scripts on rebol.org, etc.

It seems too complex to get started... the examples seem to jump 
from childishly simple, right to very hard, with no middle ground.

did you look at the view guide?

(not the reference)

which one was that?  I am confused by so many sources of information.

http://www.rebol.com/docs/view-guide.html

this is simple, with gfx and goes over everything, just to get you 
going... Its the only docs we had for years!

slider is sensitive to its size. if you give it a horizontal size 
bigger than vertical, it goes horizontal.

It does look well written, I remeber now I started reading this & 
one of the first questions I had was about Slider & since there is 
hardly any mention of it I started looking for other sources that 
I thought might be more complete....  Since you have recomended it 
I will read it from end to end & see if I am just too stupid to learn 
:-)

Henrik. thanks for that, I chalange you to find it documented anywhere.... 
 (apart from the code its self)

mhinson, I looked the hard way: through the source code for slider. 
:-)

This is of course not the way it's meant to be. Unfortunately VID 
development stopped a long time ago, but there are alternatives, 
like RebGUI and GLayout. All energy is now focused on bringing an 
incredibly improved and highly well documented VID to REBOL 3.

I need to learn that trick in time as I think it is the only way 
to find out a lot of things. It can feel frustrating to know what 
is likely to be possiable, but to spend hours trying to work out 
the very first step.

I spent a couple of years figuring out the FEEL concept, so you're 
not alone.

Yes, one thing we really need in the Rebol world is for someone to 
site down and create a full example set of what is possible with 
what we have.  I too am pretty weak with VID and View, but it's been 
something I think about every time I see a new Javascript library 
with lots of examples available.

Documetation is very hard, because the people who need it most dont 
know enough to write it, & the people who can write it dont need 
it so must struggle to know what is going to be most helpfull.

mhinson.  To give you some perspective.  Carl never intended VID 
to be the end-all-be-all graphic system.  He said he built it over 
a couple of days and expected someone to use that as motivation to 
either build their own or enhance what was started.  Ashley Trutter 
created RebGUI, which is more complete that VID.  He also received 
awards at Rebol DevCon's for his efforts.

Hi, I have read the recomended http://www.rebol.com/docs/view-guide.html
 so I have an idea of some of the stuff to expect from VID, but as 
soon as I try to do anything not explicity shown in that document 
I find my understanding is really very thin & flimsy. This is an 
example of me failing to get the results I expected. Perhaps there 
is just one basic step I have omitted that is messing everything 
else up?  Any tips would be welcome & appreciated, but dont miss 
a Sunday snooze on my account please :-)
mmm: layout [

 space 0x0         ;; thought this would make items touch each other. 
 dosnt work?
	my-sldr1: slider 300x10 [print "1 clicked"]  ; ok
	my-sldr2: slider 300x10 [print "2 clicked"]  ; ok

 space 1x1         ;; thought this would make items 1 pixel further 
 apart. dosnt work
	my-sldr3: slider 300x10 [print "3 clicked"]  ; ok
	name1: text "Inital text" 100x30             ; ok

 button "Change text" [name1/text: "Text now changed"  show name1] 
  ; ok

 button "Cente" [my-sldr2/size: 100x40 show mmm]  ;; this breaks, 
 but does make a change

 my-sldr1/step: 25             ;; imagined this did soemthing, but 
 cant see or guess what, seems to break the lat button

    my-sldr3/edge/color: blue     ;; this works but also applies its 
    self to the last button
	my-sldr3/dragger/color: red   ;; doesnt seem to work 
]

view mmm   ;; ok

? mmm      ;; shows components of object, reference for what they 
all mean is not available
? my-sldr1 ;; again guessing what they do is frustrating 

probe my-sldr1 ;; I know what the parts are but cant guess which 
ones work or what they do.

With ?, you can only see one face at a time. The subfaces are stored 
in PANE. If you try:

probe mmm


watch the console scrolling a lot of code. That's the entire face 
tree.

The space 0x0 and 1x1 should work. Otherwise try space 0 and space 
1.

it seems that you just saying they work, causes them to work... well 
the space is applied to the following item with reference to the 
one after that, not the space between the items where the word "space" 
is put....  After moving the position of the space this also cause 
the dragger to turn red too.    The probe mmm, are the 14,000 lines 
all of VID?

space works on elements from when SPACE is stated and then the space 
will stay that way for the rest of the layout description or until 
it's changed. If you want specific spacing between elements, PAD 
is used.

probe mmm is the face tree, generated by VID, when using the LAYOUT 
function. It's not VID itself.