World: r3wp

Hmm, REVERSE has more issues, I think

The biggest of which is that it hasn't been implemented yet :(

Well, I am not pushing for it.

But, CASE should be a simpler case ;-)

I liked it at the time, at least the bounded modifier version, but 
of the unimplemented proposals it's not my highest priority.

OK, so, do you think I should put the CASE proposal (mentioning your 
variant) to the article?

Sure :)

We really should go over that article and note which of the proposals 
was implemented, in which version, and which were denied and why.

article -> page

It's especially important to document the denied proposals, since 
the reasons for their denial would be instructive.

Will have a look, and, will also use one ticket to let Carl know.

What do you think of the KEEP operation from Topaz? A good idea, 
or out of scope for PARSE?

BTW, the limitation of CASE to just the next rule is not exactly 
necessary. I would like to point you e.g. to the description of the 
#localize-on #localize-off user-defined directive pair, which is 
defined so, that it will not have any problem with multitasking or 
recursion, yet the directives are not limited to just the subsequent 
value. (Robert plans to publish the source code and the documentation 
soon)

Regarding a KEEP keyword: may be a reasonable addition. I surely 
prefer KEEP, when choosing between KEEP and CHANGE.

I would definitely not make that choice. I need CHANGE too, and the 
full version with the value you're changing to be an expression in 
a paren - the last part of the proposal that isn't implemented yet. 
That's at the top of my list.

Ladislav, multitasking and recursion is not the same thing as backtracking. 
We already have backtracking bugs, we don't need to mandate more.

(bad English grammar day)

I need CHANGE too, and the full version with the value you're changing 
to be an expression in a paren

 - this changing during parsing is known to be O(n), i.e. highly inefficient. 
 For any serious code it is a disaster

Anyway, I am happy this does not influence my code

Regarding CASE and backtracking: it is not a problem when the effect 
of the keyword is limited to the nearest enclosing block.

(which is exactly the case of the #localize-on / -off directives 
as well)

O(n) isn't bad if n is small, especially compared to other parts 
of the process. Most of my apps are bound by database or filesystem 
speed.

Backtracking often happens within blocks too, but yes, that does 
limit the scope of the problems caused (it doesn't eliminate the 
problem, it just limits its scope). Mode operations also don't interact 
well with flow control operations like OPT, NOT and AND. What would 
NOT CASE mean if CASE has effect on subsequent code without being 
tied to it? As a comparison, NOT CASE "a" has a much clearer meaning.

I like the idea of a CASE option. There haven't been many times I've 
needed it, but a few. Other things are higher on my priority list 
for R3, but I wouldn't complain if this made its way in there.

Hmm, to not complicate matters and hoping that it is the simpler 
variant I modified the CASE/NO-CASE proposal to use the

    CASE RULE

and

    NO-CASE RULE


syntax, since it really looks like simpler to implement than other 
possible alternatives.

I want to keep the digits and remove all the rest,

t: "abc56xyz" parse/all t [some [digit (prin "d") | x: (prin "." 
remove x)]] print head t

this do the work but never finish. If I add a "skip" to the second 
part the result is "b56y".
How do I do?

Alternative not using parse:

>> t: "abc56xyz"
== "abc56xyz"
>> non-digit: ""
== ""
>> for c #"a" #"z" 1 [append non-digit c]
== "abcdefghijklmnopqrstuvwxyz"
>> for c #"A" #"Z" 1 [append non-digit c]
== {abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ}
>> trim/with t non-digit
== "56"

Nice way, thank you. But still curios about how to do it with parse.

>> s: "abc56xyz"                                                 
                              == "abc56xyz"

>> digit: charset "1234567890"                                   
                              == make bitset! #{
000000000000FF03000000000000000000000000000000000000000000000000
}

>> non-digit: complement digit                                   
                              == make bitset! #{
FFFFFFFFFFFF00FCFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
}

>> parse/all s [(o: copy "") any [mk1: some digit mk2: (insert/part 
tail o mk1 mk2) | some non-digit]] o
== "56"

(mm, not sure why the copy/past was messed up. i hope you get the 
idea anyway.)

I just did the same thing:


t: "abc56xyz" parse/all t [some [x: non-digit (prin first x remove 
x x: back x) :x | skip]] head t

a bit more clear:

t: "abc56xyz" parse/all t [some [x: non-digit (x: back remove x) 
:x | skip]] head t

note that copying the whole thing is probably faster than removing 
multiple times. also, doing several chars at once instead of one 
at a time is faster.

It depends on the input, but if it's a long text with many multiple 
chars to insert/remove your way will be faster. Thanks

Oh I think no need to "back"

t: "abc56xyz" parse/all t [some [x: non-digit (remove x) :x | skip]] 
head t

Endo: in your first attempt, your second rule in SOME block is not 
making the input advance when the end of the string is reached because 
(remove "") == "", so it enters an infinite loop. A simple fix could 
be:


t: "abc56xyz" parse/all t [any [digit (prin "d") | x: skip (prin 
"." remove x) :x]]


(remember to correctly reset the input cursor when modifying the 
parsed series) 


As others have suggested, they are more optimal ways to achieve this 
trimming.

Strange but I tried to remove the whole part in one time, but its 
slower than the other:


aaa: [t: "abc56def7" parse/all t [some [x: some non-digit y: (remove/part 
x y) :x | skip]] head t]

bbb: [t: "abc56def7" parse/all t [some [x: non-digit (remove x) :x 
| skip]] head t]
>> benchmark2 aaa bbb ;(executes block 10'000'000 times.)
Execution time for the #1 job: 0:00:11.719
Execution time for the #2 job: 0:00:11.265
#1 is slower than #2 by factor ~ 1.04030181979583

Doc: Thank you. I tried to do that way (advancing the series position) 
but couldn't. I may add some more things so I wish to do it by parse 
instead of other ways. And want to learn parse more :)
Thanks for all!

Anyone written anything to parse csv into an import-friendly stream?

Something like:

a,      b ,"c","d1
d2",a ""quote"",",",

a|b|c|d1^/d2|a "quote"|,|


(I'm trying to load CSV files dumped from Excel into SQLite and SQL 
Server ... these changes will be in the next version of my SQLite 
driver)

Geomol: It would be nice if trim/with supports charsets.

And also I would love if I have "trace/parse" just like trace/net, 
which gives info about parse steps instead of all trace output.
Hmm I should add this to wish list I think :)

Ashley, not sure exactly what you're after. I use simple LOAD-CSV 
and BUILD-DLM-STR funcs to convert each direction.

I use a TO-CSV function that does type-specific value formatting. 
The dates in particular, to be Excel-compatible. Was about to make 
a LOAD-CSV function - haven't needed it yet.

Here's the R2 version of TO-CSV and TO-ISO-DATE (Excel compatible):

to-iso-date: funct/with [
	"Convert a date to ISO format (Excel-compatible subset)"
	date [date!] /utc "Convert zoned time to UTC time"
] [

 if utc [date: date + date/zone date/zone: none] ; Excel doesn't support 
 the Z suffix
	either date/time [ajoin [

  p0 date/year 4 "-" p0 date/month 2 "-" p0 date/day 2 " "  ; or T

  p0 date/hour 2 ":" p0 date/minute 2 ":" p0 date/second 2  ; or offsets
	]] [ajoin [
		p0 date/year 4 "-" p0 date/month 2 "-" p0 date/day 2
	]]
] [
	p0: func [what len] [ ; Function to left-pad a value with 0
		head insert/dup what: form :what "0" len - length? what
	]
]

to-csv: funct/with [
	"Convert a block of values to a CSV-formatted line in a string."
	[catch]
	data [block!] "Block of values"
] [
	output: make block! 2 * length? data
	unless empty? data [append output format-field first+ data]

 foreach x data [append append output "," format-field get/any 'x]
	to-string output
] [
	format-field: func [x [any-type!]] [case [
		none? get/any 'x [""]

  any-string? get/any 'x [ajoin [{"} replace/all copy x {"} {""} {"}]]
		get/any 'x = #"^"" [{""""}]
		char? get/any 'x [ajoin [{"} x {"}]]
		scalar? get/any 'x [form x]
		date? get/any 'x [to-iso-date x]

  any [any-word? get/any 'x any-path? get/any 'x binary? get/any 'x] 
  [
			ajoin [{"} replace/all to-string :x {"} {""} {"}]
		]
		'else [throw-error 'script 'invalid-arg get/any 'x]
	]]
]


There is likely a faster way to do these. I have R3 variants of these 
too.

Especially since I forgot that APPEND isn't native in R2 :(

Gregg, could you post your LOAD-CSV ?

Here's a version that works in R3, tested against your example code:
>> a: deline read clipboard://
== {a,      b ,"c","d1
d2",a ""quote"",",",}

>> use [x] [collect [parse/all a [some [[{"} copy x [to {"} any [{""} 
to {"}]] {"} (keep replace/all x {""} {"}) | copy x [to "," | to 
end] (keep x)] ["," | end]]]]]
== ["a" "      b " "c" "d1^/d2" {a ""quote""} "," ""]


But it didn't work in R2, leading to an endless loop. So here's the 
version refactored for R2 that also works in R3

>> use [value x] [collect [value: [{"} copy x [to {"} any [{""} to 
{"}]] {"} (keep replace/all any [x ""] {""} {"}) | copy x [to "," 
| to end] (keep any [x ""])] parse/all a [value any ["," value]]]]
== ["a" "      b " "c" "d1^/d2" {a ""quote""} "," ""]


Note that if you get the b like "b" then it isn't CSV compatible, 
nor is it if you escape the {""} in values that aren't themselves 
escaped by quotes. However, you aren't supposed to allow newlines 
in values that aren't surrounded by quotes, so you can't do READ/lines 
and parse line by line, you have to parse the whole file.

I'm sure that the proposed PARSE for Topaz would allow the rule to 
be even smaller than the R3 version, because it includes COLLECT 
[KEEP] as PARSE operations.

That operation would be a great thing to add to the R3 Parse Proposals 
:)

I copied Ashley's example data into a file and checked against several 
commercial CSV loaders, including Excel and Access. Same results 
as the parsers above.

Brian - it may be here - http://snippets.dzone.com/posts/show/1281