World: r3wp

#include %ctx-rebgui.r

or run create-distribution.r to produce rebgui.r and then

#include %rebgui.r


Note that %rebgui.r is also available at http://www.dobeash.com/download.html
, but may not be the latest build.

Uploaded build#34 which closes the following tickets: 21,53,3,44,41,4,5

and fixes a few other problems:

1) Table dividers did not resize

2) Drop-list failed to display when items > available space and direction 
was 'downward
3) Replaced REBGUI-BUILD check with ctx-rebgui/build word

4) Added /caret-head and /caret-tail refinements to show-text (makes 
writing certain on-* type triggers easier)

ticket 53 is still faulty when I just tested it now.

very good thanks

i don't know if I'm not used to these table dividers now extending 
down the whole table .. perhaps we could have an option to turn them 
off??

I grabbed the drop-list by itself ... and I get this error

** Script Error: caret-to-offset expected offset argument of type: 
any-string
** Where: edit-text
** Near: caret: caret-to-offset face view*/caret attempt

I find the table dividers now visually obtrusive .. is there a way 
to put them on a diet ?

I'm adding a 'no-dividers option to the table widget, and looking 
at ticket 53 and the drop-list error ... hopefully I'll get some 
time over the weekend to resolve these.

could text-list be fixed, in the same manner, as table was, that 
scrolling hilite by holding arrow-up (down), simply does not hide 
hilite "under the horizon"? :-)

Why won't this line display:

label "Project:" text (form project-name/text) 80x5

Is there an error message ?

No, it just doesn't display anything.

No, I was wrong about that. Just a few seconds....

Well, there is no error message. But a long object is being displayed, 
with its text: field an empty string.

Here is the code segment:

do show-cc: make function! [] [
display "CRITICAL CHAIN To-Do List Maker Version 1.0.0" [

    ;banner "0:00:00" rate 1 effect [gradient 0x1 0.0.150 0.0.50] 115x24

    ;feel  [engage: func [face act evt] [face/text: copy to-string round 
    (session-time + (difference now/precise time-start)) show face]]
    tab-panel #HW data [
        "Projects" [
            label "Project Name:" project-name: field  144x5

            label "Priority:" priority: drop-list 30 #W "1" data ["1" "2" "3" 
            "4" "5" "6" "7" "8" "9" "10"] 10x5
            return

            label "Objectives:" label "                                      
                                                                             
                                        Exchange Rate" exchange-rate: field 20x5
            return
            area 200x50
            return
            label "Deliverables:" 
            return
            area 200x50
            return
            button "Save" [show-text ex-status "Saved"]
            button "Add" [show-text ex-status "Edit"]
            return
        ]
        "Tasks" [
            ;(print [form project-name/text])

            ;label "Project:" display (form project-name/text) 80x5 ;[show-color 
            ex-dr1op-list to word! face/text]

            label "Project:" t-project-name: text (form project-name/text) 80x5
            ;ex-drop-list: box 20x20 black
            label "Task Name:" t-name: field 79x5
            return
            label "Description:" 
            return
            t-description: area 200x50
            return

            label "Vender/Work Place:" t-vw-place: drop-list "Black" data ["Grand 
            Hardware" "Mega Mall" "Pasar Lima"] 64x5

            label "Resources Needed:" t-resource: drop-list data ["Bus to Manado" 
            "Louis A. Turk" "Caleb Turk" "Samuel Turk" "Compaq SR1520NX"] 64x5
            return

            label "Total Hours Required:" t-hours: drop-list data [0.2 0.4 0.6 
            0.8 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 
            15.0] 14x5
            label "Cost:" t-cost: field
            return
            return
            button "Save"
        ]

Works for me.

Hummm, what could be causing it not to work for me?

Sometimes when I enter text in the project-name field of the Projects 
tab and then click on the Tasks tab I get a "tell Microsoft about 
this" type error, but not always.

Usually, it just doesn't display anything.

What rebol version are you running ? Are you encapping ? What does 
the Microsoft error message say exactly ? Can you reproduce the error 
reliably ? Please post a copy of the code that can reproduce the 
error so we can try to track it down.

maybe you have started the event loop

haven't

Ok, here it is: 


rebol [
    title: "CRITICAL CHAIN To-Do List Maker"
    owner: "Louis A. Turk"
    rebol: none
]
either exists? %session-time.txt [   ;for digital timer
    session-time: to-time read %session-time.txt
][
    session-time: 0:00:00.000
    write %session-time.txt session-time
]
time-start: now/precise
do %rebgui.r
;WHAT IS rebgui-ctx.r and where do I get it?????????????
unless value? 'ctx-rebgui [
	either exists? %rebgui-ctx.r [do %rebgui-ctx.r] [do %rebgui.r]
]
set-colors
tab-size: 120x55
fonts: reduce [font-sans-serif font-fixed font-serif "verdana"]

if exists? %project-list.txt [project-list: read %project-list.txt][write 
%project-list.txt [] project-list: []]

do show-cc: make function! [] [
display "CRITICAL CHAIN To-Do List Maker Version 1.0.0" [

    ;HOW CAN THE FOLLOWING TWO LINES BE CONVERTED TO WORK WITH RebGUI????????

    ;banner "0:00:00" rate 1 effect [gradient 0x1 0.0.150 0.0.50] 115x24

    ;feel  [engage: func [face act evt] [face/text: copy to-string round 
    (session-time + (difference now/precise time-start)) show face]]
    tab-panel #HW data [
        "Projects" [
            label "Project Name:" project-name: field  144x5

            label "Priority:" priority: drop-list 30 #W "1" data ["1" "2" "3" 
            "4" "5" "6" "7" "8" "9" "10"] 10x5
            return

            label "Objectives:" label "                                      
                                                                             
                                        Exchange Rate" exchange-rate: field 20x5
            return
            area 200x50
            return
            label "Deliverables:" 
            return
            area 200x50
            return
            button "Save" [show-text ex-status "Saved"]
            button "Add" [show-text ex-status "Edit"]
            return
        ]
        "Tasks" [

            ;WHY DOES THE FOLLOWING LINE ALWAYS DISPLAY A BLANK STRING?????????

            label "Project:" t-project-name: text (either <> "" project-name/text 
            [(form project-name/text)]["ERROR: Project NAME field is empty."]) 
            80x5
            label "Task Name:" t-name: field 79x5
            return
            label "Description:" 
            return
            t-description: area 200x50
            return

            label "Vender/Work Place:" t-vw-place: drop-list "Mega Mall" data 
            ["Grand Hardware" "Mega Mall" "Pasar Lima"] 63x5

            label "Resources Needed:" t-resource: drop-list "Louis A. Turk" data 
            ["Bus to Manado" "Louis A. Turk" "Caleb Turk" "Samuel Turk" "Compaq 
            SR1520NX"] 63x5
            return

            label "Total Hours Required:" t-hours: drop-list data [0.2 0.4 0.6 
            0.8 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 
            15.0] 14x5
            label "Cost:" t-cost: field
            return
            return
            button "Save" []
        ]
        "Venders/Work Places" [
            label "Vender/Work Place Name:" vw-place: field 152x5
            return
            label "Street Address:" vw-street: field 171x5
            return
            label "City:" vw-city: field 103x5 
            label "State" vw-state: field 38x5 
            label "Zip:" vw-zip: field 23x5
            return
            label "Phone 1:" vw-phone1: field 29x5
            label "Phone 2:" vw-phone2: field 29x5
            label "Fax:" vw-fax: field 29x5
            label "Email:" vw-email: field 48x5
            return
            label "Contacts: " vw-contacts: field 181
            return
            label "Notes:" 
            return
            vw-notes: area 200x50
            return
            button "Save" []
        ]
        "Resources" [
            label "Name:" r-name: field 100x5
            return
            label "Cost:" r-cost: field 30x5 

            label "per" r-label: drop-list data ["Hour" "Day" "Week" "Month" 
            "Year"]
            return []
        ]
        "Make Lists/Charts" [
        ]
        "How To" [
        ]
        "Help" [
        ]
    ]
]
] ;end show-cc
do-events

My questions are in the code. Look for ???????????????

I have another question also. I need a button that set a switch and 
display different text on the button to show how the switch is set. 
Does reb-gui have such a button?

Pardon all the obvious typos. set = sets, and display = displays

Anton, I'm running REBOL/View 1.3.2.3.1 5-Dec-2005 Core 2.6.3. I'm 
not encapping....yet. I do not know why I sometimes get the error 
message but usually not.

Now I do not seem to be getting the Microsoft error message at all, 
but I don't know what I changed to make a difference.

Unfortuanately, I have to leave to run some errands. It will probably 
be tomorrow tonight or tomorrow before I can get back.

tomorrow tonight = tonight

Well, from a bug-isolating point of view, it's not much use unless 
you can reproduce the bug at least in a semi-reliable way.

1) Convert the next two lines to rebgui


;banner "0:00:00" rate 1 effect [gradient 0x1 0.0.150 0.0.50] 115x24

;feel  [engage: func [face act evt] [face/text: copy to-string round 
(session-time + (difference now/precise time-start)) show face]] 


(Note; to-string makes a copy for you already, so no need to copy 
again.

Actually, showing the face converts face/text to string for you automatically...)

display "" [my-text: text 32x10 "0:00:00"] 
do bind [
	font: svv/vid-styles/banner/font 
	effect: [gradient 0x1 0.0.150 0.0.50]
	feel: make face/feel [
		engage: func [face action event][
			if action = 'time [
				face/text: now/time ; <-- set the time as you wish
				show face
			]
		]
	]
	rate: 1
	show self
] my-text
do-events

2) "Why does the following line always display a blank string ?"


t-project-name: text (either <> "" project-name/text [(form project-name/text)]["ERROR: 
Project NAME field is empty."]) 80x5

It is unclear to me what you want here exactly.
The code in the parens is only evaluated once, at layout time.
But project-name/text hasn't been set to anything at this time
(other than maybe a default empty string.)

Do you want the t-project-name/text to dynamically reflect the status
of the project-name field ? That is, to update as you type ?

But let's test with some shorter code:

display "" [
	project-name: field 

 t-project-name: text (either <> "" project-name/text ["not empty"]["empty"])
] do-events

The idea is to modify the field so whenever you type a key, the t-project-name 
is shown,

and to modify the t-project-name REDRAW so it sets its own text depending 
on the status of the field's text.
Let's look at them:

probe project-name/feel
probe t-project-name/feel

Let's modify the project-name key handler, appending the show.

project-name/feel: make project-name/feel [
	use [body][

  body: second :engage ; we get the engage function body block using 
  SECOND

  append second third body [show t-project-name] ; <- add this snippet 
  of code to it
	]
]


And let's modify the t-project-name REDRAW function (it has no feel 
so we make one
from the default FACE feel):

t-project-name/feel: make face/feel [
	redraw: func [face action position][
		if empty? face/text: project-name/text [face/text: "ERROR:"]
	]
]

Now all together:

display "" [
	project-name: field 

 t-project-name: text 50 (either <> "" project-name/text ["not empty"]["empty"])
]

project-name/feel: make project-name/feel [
	use [body][

  body: second :engage ; we get the engage function body block using 
  SECOND

  append second third body [show t-project-name] ; <- add this snippet 
  of code to it
	]
]

t-project-name/feel: make face/feel [
	redraw: func [face action position][
		if empty? face/text: project-name/text [face/text: "ERROR:"]
	]
]

do-events

Uploaded build#36 which adds a no-divider option for table, corrects 
resizing problems with info areas, and adds viewed? func if not defined 
(i.e. script is being encapped with enface).

Graham, ticket #53 is working under latest build and I could not 
reproduce drop-list problem. Also note the no-dividers option ;)

Anton, thanks! I just arrived back home. I'll try your code Monday 
and get back with you.

Cool. :)

Is there a tree widget for RebGUI? I need to build something to browse 
the filesystem

Hello Maarten, I have a homemade tree view. It's not complete yet, 
but it works. I was planning to make it complete, but I stopped because 
I am waiting for REBOL 3 and VID+. Anyway, If you want to take a 
look at my homemade TreeView, send me an email [xy-:-cai-:-msa-:-hinet-:-net].

Is there a tree widget

 ... no, but the request-dir function would be much better if there 
 was one.

Thanks Ashley .. I'll test it now.

I get this with ticket #53 and the lastest table.r

probe
["A"]
[1]
remove and probe again
[none]
[1]


So, not working for me.  Do I need something more than the table.r 
?

but the no-dividers is working fine!