World: r3wp

but maybe some Win32API guru will tell us more.

flash memory has a finite amount of erase cycles

 ... from memory [no pun intended] it used to be about 200,000 cycles, 
 raised to 2,000,000 or so cycles in current generation flash technology. 
 Note that flash drives try to distribute writes evenly across the 
 media and mark areas as unreadable once they approach/exceed certain 
 thresholds. Nothing wrong with using flash as a swap device as long 
 as it's doing several swaps an hour not several a second! ;)

2007 has been tough on my hardware -- first my iBook hard disk croaks, 
now my PC (following a brief power outage) decides it no longer wants 
to switch on.  It lights up for a second, then powers down again. 
 I don't know where to start (power brick, motherboard?)...

power supply

most likely thing to fail in any pc barring the hard drive

I've seen the symptoms you describe quite a few times.  All solved 
by replacing the power supply.

I've had problems with power supplies in PCs, so that's a good guess. 
Make sure you have PSU, that can pull make watts.

Did the power outage damage your power supply.

was it a spike ?

pull many watts

Watt ?

Effect is measured in Watt. (My english isn't the best this late 
at night.) :)

sorry, joke

lol, got it. :)

So, Chris, you have a hard drive failure followed by a power supply 
failure.  It's common.

Don't take it as though the universe is against you ...

but if it keeps happening .. you might want to see how clean your 
power is .. and invest in surge protectors

The universe *is* against me.  Don't try to suggest otherwise...

I wasn't around when the outage happened.  It was plugged into a 
surge protector.  However, the power supply is around 6 years old 
and the fan quit late last year.

Any potential employers will note your paranoia on this public web 
forum ...

Gee....

Good thing I'm 'Christopher' professionally...

Oops...

:)

: )

The universe *is* against me.  Don't try to suggest otherwise...
 - I believe  

And

I'm on the hit list too...

Perhaps I can offer an alternative to that universe question?  I 
personally know the guy who made it.  : ) C'mon guys, I couldn't 
resist. 

OK, back to hardware.

And I know the guy who made the guy who made the universe

Wow, you're all set then.

Oh, that's not a guy! "Behind every important man is a woman."

Ah, maybe that's why the universe is against them. : )

:-)

Ok, pulled out the brick and cables.  It appears to be 250W ATX/ATX12V 
with a 20-pin connector, 5 peripheral (Molex?) connectors and 2 floppy 
connectors.

When looking for a replacement, can I ignore the ATX and just go 
for ATX12V?  Or one with a 20+4pin connector?  I'm thinking 400-500W.

(I hate shopping around for this kind of stuff)

If you purchase a ATX 2 power supply with 24 pin power connector, 
ask them to give you a free adaptor to turn it into 20 pins.  The 
ATX 2 power supplies normally have cables for SATA hard drives

Is that ATX1V 2.0?

ATX12V 2.0

I just know it as ATX 2.0

Are these very fast speeds for %server-speed.r :

Console:   0:00:00.672 - 753 KC/S
Processor: 0:00:00.25 - 3456 RHz (REBOL-Hertz)
Memory:    0:00:00.625 - 76 MB/S
Disk/File: 0:00:00.172 - 177 MB/S

I think that's pretty good

It's considerable better than REBOL.org -- which runs on the original 
8086 chip as far as I can tell :-)
Console: 0:00:00.11134 - 4546 KC/S 
Processor: 0:00:00.704108 - 1227 RHz (REBOL-Hertz) 
Memory: 0:00:03.0809 - 15 MB/S 
Disk/File: 0:00:09.183468 - 3 MB/S

Those are good numbers for a current machine Louis.

Henrik, Sunanda, Gregg, Thanks for the feedback!

By the way... Is there anybody outthere that has a Hardware device 
that runs with rebol?.. I like a Hardware device.. that talks and 
uses Rebol.. I want to program that thing to do in Rebol what i want 
it to do... Because im very Jalous at these guys at Processing "http://hardware.processing.org/"..its
JAVA oke.. but If I want my Home-Robot to do a job for me I would 
like to say that in Rebol rather than in Java or C... ;-)

I just want my Home microwave to say to me "** Script Error: I have 
no power yet or was it jet?

Like the HP Calculators.. they where so famous on their programming 
that people went crazy back then... (And that was only in Basic or 
C)..

I want to visit a Cash-Machine and "not" see the blue screen of dead 
but "Please call Carl, init.r is missing"..

In 100% a electronics but it should be possible to create a Hardware-Gadget 
that has rebol inside without theneed of a VM..

Rebolint - don't worry, with R3 architecture, those things you describe 
are - inevitable. I am sorry for guys who were not with us from the 
very beginning, as they will be jealous to hear all the stories of 
pre version 3.0 era :-)