World: r3wp

And that way I wouldn't have all the issues of mismatched ssl certificates

for subdomains it's simple (and much cheaper than domains, since 
you don't have to buy each one) .. you use rewrite rules and modify 
domain to a get parameter that cheyenne can act on

I think so called wildcard certificate work on all subdomains

I mean, you buy one for all subdomains

I don't buy the domains ..the users do :)

I don't have that many users .. .so maybe I should start again ...

Who do you use to manage your domains?  Godaddy?

And is it easy to redirect subdomains to other ip addresses?

if you have nginx in front you can have cheyenne servers reverse 
proxied to many ip-s yes.. in the same way you can for different 
subdomains or domains  (rule for reverse proxy is very simple)

I can send you example if you don't find it on net

I don't have nginx running ... it's a windows2003 server

you also get easy https support with nginx if you need it some day 
... what do you need certs now?

I don't know how stable it's supposed to be but nginx runs on windows 
too now.. I use it here for dev

So, one certificate will work across all subdomains?

I think, if I understood the "wildcart domains" correctly .. they 
are more expensive than ordinary

== "wildcard certificates"

Single Domain with Unlimited Subdomains (Wildcard): $199.99 https://www.godaddy.com/ssl/ssl-certificates.aspx

http://www.comodo.com/e-commerce/ssl-certificates/wildcard-ssl.php

expensive

$800 for a certificate

godaddy-s option is cheaper

yeah ...

well, it depends on the number of subdomains, if this is worth it

I might experiment first with a self signed wild card certificate

Is there an equivalent for kill on Win32 ?

Probably, but I don't know what it is

Cheyenne is supposed to be able to reload the configuration without 
having to restart so I just need to be able to tell it to do this

Yes, that's what I advised

There's some info about it in the changelog. Maybe it says how to 
do it on Windows

doesn't cheyenne have kill support ?

Yes, as explained in the above Syllable Server manual

IIRC there are win32 routines.

pskill of sysinternals works like kill

also try taskkill 
http://commandwindows.com/taskkill.htm

taskkill /?

what would be the best way to resize and crop an image after it's 
uploaded on cheyenne .. using commandline imgmagick, I think oldes 
was making an magemagick binding once?, are there more light ways, 
can pure rebol do it?

I use a call/output to imagemagick, not the best way but it runs 
in less than 200ms which is ok.  Oldes way should be faster 8-)

I use this script:  http://box.lebeda.ws/~hmm/rebol/im-min.r

loaded in on-application-start

Then I use code like:
with ctx-imagick [
			default/filter: 5
			default/blur: .95
			start
			try MagickReadImage *wand to-local-file src_file
			*wand2: CloneMagickWand *wand
			if h > 800 [

    try MagickResizeImage *wand to-integer (w * (600 / h)) 600 default/filter 
    default/blur
				try MagickSetImageCompressionQuality *wand 70
				trg_file: to-local-file rejoin [dir id #"_" sfil %_x600. ext]
				try MagickWriteImages *wand trg_file
				
				ClearMagickWand   *wand
				DestroyMagickWand *wand
				*wand: *wand2
				*wand2: CloneMagickWand *wand
			]
			
			nw: to-integer (w * (400 / h))
			either nw > 780 [

    try MagickResizeImage *wand 780 (h * 780 / w) default/filter default/blur
			][

    try MagickResizeImage *wand nw 400 default/filter default/blur
			]

			try MagickSetImageCompressionQuality *wand 70
			trg_file: to-local-file rejoin [dir id #"_" sfil %_x400. ext]
			try MagickWriteImages *wand  trg_file
			ClearMagickWand   *wand
			DestroyMagickWand *wand
			*wand: *wand2
			*wand2: CloneMagickWand *wand
			

   try MagickResizeImage *wand to-integer (w * (200 / h)) 200 default/filter 
   default/blur
			try MagickSetImageCompressionQuality *wand 70
			trg_file: to-local-file rejoin [dir id #"_" sfil %_x200. ext]
			try MagickWriteImages *wand trg_file 
			ClearMagickWand   *wand
			DestroyMagickWand *wand
			*wand: *wand2
			*wand2: CloneMagickWand *wand
			

   try MagickResizeImage *wand to-integer (w * (60 / h)) 60 default/filter 
   default/blur
			try MagickSetImageCompressionQuality *wand 70
			trg_file: to-local-file rejoin [dir id #"_" sfil %_x60. ext]
			try MagickWriteImages *wand trg_file
			ClearMagickWand   *wand
			DestroyMagickWand *wand
			*wand: *wand2

			end
		]

It looks complicated but it creates multiple images while loding 
the source just once.

I would like to create some function for it one day, but so far I 
use this hard code

to get image sizes I use:
with ctx-imagick [
		w: h: none
		attempt [
			start
			try MagickPingImage *wand to-local-file file/2
			w:   MagickGetImageWidth  *wand
			h:   MagickGetImageHeight *wand
			ext: MagickGetImageFormat *wand
			end
		]	
	]

The result is here: http://lucya.desajn.net/projekty/

crop

ups.. I wanted to search for crop :)

Very cool Oldes! Thanks a lot! (and cool galery on that page)

Here is newer version - http://box.lebeda.ws/~hmm/rebol/imagick-min.r

in this version you can see crop-images function

If I have a domain like rebol.com, how do I make it so that a.rebol.com 
b.rebol.com etc ... work so that a.rebol.com etc appears in the browser 
address bar.  
What I want to do is create virtual domains ....