World: r3wp

Everything is on the heap, and I even added mutex around the callback 
code section without any luck.

I can ensure that it's not a thread synchonisation problem. The memory 
for the callback is never used by anything on the c-side after setup.

It's probably a thread synchronisation problem within R3

can you temporarily disable threading in the library to see if that 
helps?

No, but the same callback code works from an other place where it's 
the same thread as R3.

well, then that's looks pretty much like the problem

the immediate solution is to have a piece of code, running in the 
same thread as the R3 host, which is used to initiate all callbacks

everwhere else, instead of initiating callbacks directly, you hand 
over control to this thread running this piece of code initiating 
the callback for you. that'll require basic inter-thread communication, 
is kaj already mentioned above

the real solution is to have R3 do this kind of thread synchronisation 
internally

Well, to get this code started I need to call it from R3, but than 
I can't return to R3 otherwise I get a new thread dealing with it. 
So this is not possible.

The other option is to poll from R3 in regular intervalls. But as 
we miss timers at the moment, this won't work too.

But I could trigger a poll via callback sending an integer! :-) It's 
two rounds than but that would work.

Because the interger callback works.

i assume you currently have roughly the following flow:
- R3 calls into extension (via RX_Call)

- extension calls into library, passing an extension-internal "activity" 
handler along
- the library calls the extension's activity handler
- the extension activity handler initiates a callback into R3

- R3 call init-lib

- init-lib installs a listener, setups a C-level callback handler 
(CBH) and returns
- the listener is sometimes triggered, calls the CBH (new thread)

- CBH prepares Rebol callback, calls Rebol callback (and here it 
crashes with string!, not with integer!), continues and ends

Ok, the callback / pull combo works :-) Not nice, but workaround.

good to know :)

To complete the sequence from above:

- Rebol exectues the rebol side callback function, which make a synchronous 
call to the lib, getting all buffered messages and continues to process 
them

I have a very strange effect: The init_block gets a c filename attached. 
The .r file that is used to generate the .h header file of course 
doesn't inlcude it. And the generated init_block numbers don't include 
it too.

So, this happens at compile / run-time.

When entering RX_Init the init_block string allready has the c filename 
appended.

How can this be? I mean it's a const-char array.

Ok, so I found out that the last number wasn't 0. When generating 
the header file I get this as last line:

	116, 105, 97, 108, 105, 122, 101, 100, 34, 10,

};

This is the line makeing problems. When I change it to:

	116, 105, 97, 108, 105, 122, 101, 100, 34, 10, 0

};

it works.

Seems the R3 script I use has a bug, there is a strange line:
to-cstr: either system/version/4 = 3 [
	; Windows format:
	func [str /local out] [
		out: make string! 4 * (length? str)
		out: insert out tab
		forall str [
			out: insert out reduce [to-integer first str ", "]
			if zero? ((index? str) // 10) [out: insert out "^/^-"]
		]
		;remove/part out either (pick out -1) = #" " [-2][-4]
		head out
	]
][

The one commented. Than it works.

Is there an offical place to get the latest verison of this header 
converter script?

The host kit is the only place I know of

Can someone explain me, why is Carl using such an 'encryption' and 
why not just to use it as const char like I do here:

https://github.com/Oldes/R3-extension-FMOD/blob/master/main.c#L417

Is it because he wants to be compatible with some old compilers?

Oldes, yes, it's about compiler compatibility.

And compilers are affected?

btw it's really strange.. I would thought that that's a basic thing. 
To be able easily define a string.

Some compilers might be.

Usually, MSVC is the problem, in such cases.

C90 requires compilers to support _single_ string literals (i.e. 
one quote "...") of at least 509 characters.

(C90 ~= C89 ~= "ANSI C")

C99 raides that minimum to 4095 characters.

And MSVC doesn't support C99.

Then there's also a limit how big concatenated strings can get (i.e. 
"..." "..." "..."). Which is 65k in MSVC, IIRC.

So, if you don't do extremely long lines and a 65k+ init string, 
you should be fine with string literals even in MSVC.

Which is why I don't care either :) String literals ftw!

Btw, here's my variation of a header generator script:
https://github.com/earl/r3-zmq/blob/master/make-ext-header.r3


It has the nice advantage that it automatically generates a dispatch 
table for your commands, enabling a clean and concise RX_Call like:
https://github.com/earl/r3-zmq/blob/master/zmqext.c#L31-35

For example, take the zmqext extension specification:
https://github.com/earl/r3-zmq/blob/master/zmqext.r3

This is the header file generated by above generator script:
https://gist.github.com/e22a35049ae56324004a

rebol.org the script library is so well done that everyone use github 
:P.

I vaguely recall that someone was working on ODBC support for R3. 
Did that ever become usable? Is there a link to this work?

http://www.diefettenjahresindvorbei.de/odbc/odbc-docs.html

Thanks! I've been using R2/Command to do the database access and 
R3 to process the data. All in the same script, using a trick I'll 
post to the Windows group.

There's a couple bugs in the REBOL portion of the ODBC extension 
mentioned above. I'll try to make a patching wrapper module.

This module loader for the odbc.dll extension handles the bug in 
its open handler that prevented it from using block specs with a 
target:

REBOL [
	title: "ODBC Extension Patch"
	type: module options: [private]
	needs: [%odbc.dll]
]

odbc: import 'odbc


system/schemes/odbc/actor/open: func [port [port!] /local result] 
bind [
	port/state: context [access: 'write commit: 'auto] 

 result: open-connection port/locals: make database-prototype [] case 
 [
		string? select port/spec 'host [ajoin ["dsn=" port/spec/host]]
		string? select port/spec 'target [port/spec/target]
		'else [cause-error 'access 'invalid-spec port/spec]
	]

 all [block? result lit-word? first result apply :cause-error result] 
	port
] odbc

Unfortunately, there's an error in its fallback behavior that makes 
it a bit difficult to use. In its docs, section 3.7:

 If there is no applicable REBOL datatype to contain a SQL value, 
 the value will be returned as a string.

The binary data is returned in a value of the string! type, rather 
than of the binary! type, which results in a corrupted string that 
you can't do anything with. If the value was returned as a binary 
then we could perform the conversions ourselves. I ran into this 
problem when returning SQL values of the tinyint and text types.

I love the method for triggering errors from the native core though 
:)