World: r3wp

I didn't hear much about this day job that he has, but I can only 
hope that it was a contract to finish R3 for a big company and once 
that project was completed, release it.

I know, wishful thinking.

i've just got a "segmentation fault" while my R3 script was running. 
:-(

It's caused by GC.

Brings back memories

I have some knews regarding R3.

In the last two days I had longer calls with Carl and decided how 
to move R3 forward. This is how it will be done:

wowo!

:)

(sorry .. just happy that contact has been reestablished)

- The RMA team will help to get some burden from Carl's shoulder 
and work on open issues. This will be setup in that we get partial 
access to the necessary code parts and can work on these.

- We are going to extend our internal testing infrastructure etc 
on these new R3 releases and run it against our applications we crate

- Carl and I will have regular calls to discuss the status and things 
where we need his advise etc. So, to keep the loop closed and gain 
more speed

- I will meet with Carl in person on 23rd Juli to discuss further 
things

- Unitil that we want to get most administrative setup done, so that 
we are ready to go

We are going to drive the priorities by the things RMA needs. This 
shouldn't be a problem for anyone because if you are going to use 
R3 for serious development than you will need it as well.


The thing is, that we are not going to jump-start for every requested 
feature etc. We know there is a lot to do and we will work through 
it step-by-step. And, this is not because we don't care what you 
all state here. Definetly not. I want to move R3 forward as fast 
as possible. This needs concentration, focus and pushing to finally 
get it done. At the end of the day the only thing that counts is, 
if we make it to make R3 stable enough for prime time development.

So, stay tuned and I must say that this is the most promising development 
for a long time.

Let's see if Carl and RMA will make it to deliver on this. Which, 
still needs to be proofed but I'm not going to stop to push for it.

Good news

So, he is opening up parts of the source to you?

Thank a lot for the news Robert. Currently it is the most important 
thing is to continue on develeopment of R3, so it is definitely not 
a problem to drive the priorities by the things RMA needs.. Please 
keep us informed when you have more news from Carl.

Good there is some progress. Does the above mean, that Carl himself 
is not returning to R3 development yet? What about blogs/twitter? 
Maybe Carl could open-it for RMA too, but the question is, if you 
want to blog ....

From my point of view it means, that there is no NDA, just that Carl 
lost interest to be with us and work on REBOL.

I think you're right

If so, then there is a question, if Carl shoul not consider fully 
open-sourcing R3. But we most probably know the answer. I would be 
really intested into Carl officially telling the REBOL community 
his motives to (dis)contiu with R3 development. It all feels really 
dishonest, and I wonder, for any eventual future project, how Carl 
wants to win the trust of ppl.

I might not be as good as you guys are, but if there is anything 
I can do to help R3, let me know. My email: [JerryTsai1218-:-Gmail-:-com]. 
Let's make R3 hit the beta this year.

something like free-rebol bounty ? :)))

That's great new Robert. Thanks for the post.

Oldes, as far as I can tell, there is going to be an NDA.

I think Oldes was just referring to speculations made in some channel 
here on AltME a little while ago. I think the speculation was that 
one reason for Carl disappearing publicly could be that he is prohibited 
from talking about REBOL by an NDA-like contract at his current occupation.

I probably shouldn't spread that speculation further :)

Some notes:
- We will have an NDA

- Carl didn't lost interest, he is full comitted to R3. His contract 
work is (still) / was very intense. Things get a bit more relaxed 
there now.

Much kudos to Robert for taking such a powerful initiative from which 
all of us will benefit.


I wish you, RMA and the RMA team every success; you all really deserve 
it.

Thanks Peter.

- I / RMA will be the main communication channel. I have access to 
Rebol-3 twitter and there exists a RMA twitter.

- We will continue to work on the R3-GUI and release it as we did 
before (sometimes there might be longer periods of no-release, if 
we are doing massive changes)

- The main focus will be: fixing bugs, defining and writing down 
how datatypes are handled WRT conversion, priority, sorting etc.

NDA ?

LOL  AFTER 111 version there zill be a NDA ( non disclosure agreement) 
but non disclosure agreement to disclose what the  emptyness  of 
nothingness ?  go ahead  please :)

Robert I'm happy you say you will continue to work on r3-gui but 
will that work produce some result  ?

Carl didn't lost interrest ?? aaaaaaaaahahaha who do you think you 
are fooling Robert serriously ?

wasn't carl some moth ago that was saying the rebol was a commercial 
faillure and that he needed tto get a real work to feed his familly 
?

aaaaaaaaahahaah isn't that called loosing interest  ?

I laughed so much that I'm impatient to comeback in september to 
see the bunch of new jokes you will have in stock

Where he said, that it's a commercial failure?

In Alphe's imagination

Can R3 load and use shared libraries like R2 with load/library ?


I see a group named "!REBOL3 /library". Is that about such libraries, 
or are extensions for that? (Group "!REBOL3 Extensions".)

There was a bounty, and attempt from Max (not finished IIRC), to 
bring R2 like DLL interface to R3, to simplify it for users not being 
able to utilise full extension interface.

Some ppl found out, that using extension interface is not so hard 
as it seems though ...

Has it been tried to get the source for R2's load/library, make routine! 
and then the calling from Carl? That seems to me to be a lot easier 
to start with that code, as it do work.

I know, it has been tried many times to get sources, but maybe he 
would agree on such a specific case, as it would be needed in R3 
anyway.

Converting a R2 DLL into a R3 one is really simple. I have done our 
DLLs in a way that I can compile them as R2 or R3 version. The only 
change is a .DEF file for the linker. Everything else is the same.

I think about others DLLs, like OpenGL.

To make them into a R3 extension is pretty simple. The R3 external 
interface is way simpler than in R2. So, yes, via IMPORT and R3 extension.

Ok, I get this error:


>> opengl: import %/System/Library/Frameworks/OpenGL.framework/OpenGL

** syntax error: script is missing a REBOL header: %/System/Library/Frameworks/OpenGL.framework/OpenGL

So such DLLs need to be wrapped in some REBOL code, or?

There is some doc here:

http://www.rebol.com/r3/docs/concepts/extensions-making.html#section-19


As I read it, I would need to write an extension to access external 
APIs like standard OS libraries.