World: r3wp

OK I am just doing something stupid and will clear that up soon.

is there a good way to use mingw with CALL? I need to call git through 
msysgit, while using ssh keys. From what I can find, this looks almost 
impossible.

OK, this is freaky:

>> system/version
== 2.7.8.2.5
>> a: list-env
== [
    "TERM_PROGRAM" "Apple_Terminal" 
    "TERM" "xterm-color" 
    "SHELL" "/bin/bash" 
    "TMPDIR" "/var/folders/6O/6OnXy9XG...
>> help a
A is a block of value: [
    "TERM_PROGRAM" "Apple_Terminal" 
    "TERM" "xterm-color" 
    "SHELL" "/bin/bash" 

    "TMPDIR" "/var/folders/6O/6OnXy9XGEjiDp3wDqfCJo++++TI/-Tmp-/" 
    "Apple_PubSub_Socket_Render" "/tmp/launch-BrITkG/Render" 
    "TERM_PROGRAM_VERSION" "273.1" 
    "USER" "Ash" 
    "COMMAND_MODE" "legacy" 
    "SSH_AUTH_SOCK" "/tmp/launch-HlnoPI/Listeners" 
    "__CF_USER_TEXT_ENCODING" "0x1F5:0:0" 

    "PATH" {/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin} 
    "PWD" "/Users/Ash" 
    "LANG" "en_AU.UTF-8" 
    "SHLVL" "1" 
    "HOME" "/Users/Ash" 
    "LOGNAME" "Ash" 
    "DISPLAY" "/tmp/launch-U0Gaqw/org.x:0" 
    "_" "/Users/Ash/REBOL/rebol"
]
>> length? a    
== 18
>> select a "USER"
== "Ash"
>> select a "HOME"
== none

Have you lost your home?

Length? a should be 36 given the above code....
Does this list you all the env variable names?:
    foreach [x y] a [print x]

Same weird behavior here. All the words that print out with Sundanda's 
loop return values all the other's don't.

Actually with my list-env, everything up to PATHEXT works with select 
but apparently nothing after.

and what happens if you mold/all it?

Have you tried using SELECT/skip ... 2?

I get the same results on Windows. When I assign a block with the 
same contents to a directly, it all works. It looks like LIST-ENV 
is building a bad block.

No such error in R3, but LIST-ENV returns a map! there, so it wouldn't 
have the same error.

my discovery of the day:

>> same? rebol system
== true

just stumbled upon it yesterday too :) accidentally. i havent noticed 
that im not in bash and typed rebol

>> map-each e [] [e]
** Throw Error: Return or exit not in function
** Where: map-each
** Near: return any [output make block! 0]


is it a known bug? im new to cure code. i don't even know where to 
look for it. can some one help? (it works in r3)

CureCode: http://curecode.org/rebol3/view-tickets.rsp

Click on "Search" filter type, type "map-each" in input field, then 
hit [Find].

hmm.. that's only for R3. this error is for R2 only.

Onetom, that error has been reported already and fixed in R2/Forward, 
but it hasn't made it into R2 yet. Here is the revised MAP-EACH:

map-each: func [

 "Evaluates a block for each value(s) in a series and returns them 
 as a block."
	[throw catch]

 'word [word! block!] "Word or block of words to set each time (local)"
	data [block!] "The series to traverse"
	body [block!] "Block to evaluate each time"
	/into "Collect into a given series, rather than a new block"

 output [any-block! any-string!] "The series to output to" ; Not image!
	/local init len x
][
	; Shortcut return for empty data
	either empty? data [any [output make block! 0]] [
		; BIND/copy word and body
		word: either block? word [
			if empty? word [throw make error! [script invalid-arg []]]

   copy/deep word  ; /deep because word is rebound before errors checked
		] [reduce [word]]
		word: use word reduce [word]
		body: bind/copy body first word
		; Build init code
		init: none
		parse word [any [word! | x: set-word! (
			unless init [init: make block! 4]
			; Add [x: at data index] to init, and remove from word
			insert insert insert tail init first x [at data] index? x
			remove x
		) :x | x: skip (

   throw make error! reduce ['script 'expect-set [word! set-word!] type? 
   first x]
		)]]
		len: length? word ; Can be zero now (for advanced code tricks)
		; Create the output series if not specified
		unless into [output: make block! divide length? data max 1 len]
		; Process the data (which is not empty at this point)

  until [ ; Note: output: insert/only output needed for list! output
			set word data  do init

   unless unset? set/any 'x do body [output: insert/only output :x]
			tail? data: skip data len
		]
		; Return the output and clean up memory references
		also either into [output] [head output] (
			set [word data body output init x] none
		)
	]
]

BrianH: thanks, but where can i find such info normally, beside in 
ur brain?

R3 chat #837 is where the R2/Forward project is normally stored. 
I'll be putting it in github as well as soon as I can figure out 
how to export or replicate the change history.

the change history of what? r3 file storage?

Revisions to R2/Forward since the initial release to DevBase.

There is a similar bug in many of the R3 mezzanine control functions 
(the opposite, actually), but fortunately most of R2's mezzanine 
control functions were converted to native in R3, so the bug doesn't 
affect much.

The revised mezz-series.r (relative to the 2.7.8 SDK source) is in 
R3 chat #8008 - that's the number of the particular version, which 
you can see by going to #41 (R2/Mezzanines) and doing a LF command.

these numbers are like the memory locations in home computers... 
spectrum, c64 (i didn't have an amiga..) in DOS 8000 was the HDD 
bios start, i think..

The chat interface uses numbers as a deliberate design choice because 
it is easier to memorize and refer to a number than it is to a path 
or message ID. You can even write a message number in #8008 form 
in another message and it can be followed like a hyperlink to the 
message of that number. You can also do the hyperlink trich to CureCode 
tickets using the bug#539 form, which will take you to http://issue.cc/r3/539
(that R3 bug I mentioned above).

Anyone have this ? http://www.fm.tul.cz/~ladislav/rebol/peekpoke.r

It's not on Ladislav's site anymore at that url

Is there a point in allowing refinements like this?

/1a

REBOL also allow decimal! refinements like:

/1.2

but treat it like an integer refinement.


Some further thoughts: Can refinements be categorized in two groups, 
integer refinements and word refinements? If yes, then the refinement 
datatype maybe should be two different datatypes?

Hm, maybe what I call integer refinements shouldn't be allowed at 
all, as I see no point in them. I can't get the desired path using 
integer refinements as in:

>> to-path [blk /2]
== blk//2

The correct way is:

>> to-path [blk 2]
== blk/2

So if integer refinements are useless, what's the point?

John, I'm not sure I understand. Aren't you confusing path with refinement?

No, they're different. I know. You can use refinements to build paths, 
else refinements are used in functions. REBOL allow what I call integer 
refinements, as the scanner doesn't give error. I ask why is that?

Or, maybe we can't actually use refinements to build paths, now I 
think of it. :-)

I can cook it down to: Why would REBOL allow refinements like:

/1
/1a
/1.2


My guess is, it's a side effect of how the scanner handle paths with 
integers, like: blk/1

So shouldn't refinements have the same rules as words, like the core 
manual suggest?

Ah, now I understand. It's probably a "bug" in scanner.

Because those refinements are allowed, you can write:

f: func [/2] [ ... ]

But that kinda makes no sense.

No kidden, people get confused:

>> f: func [/2] [if 2 [print "It's 2!"]]
>> f
It's 2!
>> f/2
It's 2!

I can even write

>> f/3
It's 2!

In R3, at least we get:

>> f: func [/2] [if 2 [print "It's 2!"]]
>> f
It's 2!
>> f/2
** Script error: incompatible refinement: 2

But the refinement is still valid.

Graham, see:

http://www.fm.tul.cz/~ladislav/rebol/library-utils.r

I'm having problems renaming a file on a USB stick with R2 under 
Windows. It reports "cannot access". R3 does not have this problem. 
Can anyone reproduce this?

I did this under OS X with R2:

>> write %/Volumes/NICOM/test.txt "Testing..."
(and the files was produced, then)
>> rename %/Volumes/NICOM/test.txt %/Volumes/NICOM/test2.txt
** Access Error: Cannot rename test.txt

So an error.

With R3, it works here.

ok, that is interesting. possibly file system related?

Possibly, as rename works on HD in R2.

the mezz source says that if the file is not found, then it can't 
be accessed.

Henrik, I have no problem with renaming a file on USB stick...tested 
under WindowsXP SP3

Henrik, I can read the file with REBOL command READ in R2.

perhaps it's a timing issue?

it works, if I open the port and find the file by hand

>> read %/f/
== [%data %KeePass/ %TrueCrypt/ %autorun.inf %test.r]
>> rename %/f/test.r %test2.r
>> read %/f/
== [%data %KeePass/ %TrueCrypt/ %autorun.inf %test2.r]
>>

RENAME uses OPEN, not READ.