World: r3wp

If you are making a native compiler for Android, integrating with 
the NDK is the best way to go. Unless what you are making is a compiler 
that runs *on* Android devices, which would be great; then you would 
make the libraries for that compiler integrate with the NDK.

Does the NDK provide access to all the GUI framework?

Yes. Though some levels of access require more recent versions of 
Android. Fully native apps require 2.3 or above.

That's very good news.

Most Android phones run 2.2 or below, so that good is a bit limited.

I would personally appreciate it if you supported 2.2, as that is 
the last version that my phone model currently has been upgraded 
to. It would be a good idea to look up the stats for which percentages 
of Android phones are running which versions. I haven't seen a 1.5 
phone in over a year, but my gf's phone won't be upgraded past 1.6 
(I need to get her a new phone).

We did a lot of research into the NDK for the R3 project. I was really 
interested in how an Android host program would be structured, how 
the Android application model would map to the R3 model. Hint: Android 
doesn't really have applications at all.

In a lot of ways, Android reminds me of the Oberon System. You don't 
install apps, you install system services, that for some of the types 
of services provide a UI, and for other types of services provide 
an API or task execution model.

I will probably go for 2.1 or 2.2 as minimal system requirement.

Go for 2.0, and you'll cover almost everything. Certain Red facilities 
could require more recent versions, but between 2.0 and 2.2 there 
were mostly just features added, as far as native code is concerned. 
If you support pre-2.3, you might as well set the baseline as far 
back as 2.0.

There are a lot of people still waiting for their manufacturers to 
provide upgrades from 2.1 to 2.2, so 2.1 support is a good idea. 
The main thing added in 2.2 was the Dalvik JIT compiler, and that 
doesn't really affect native code that much. The NDK docs have a 
pretty good changelog that tells you what was added in each version.

Yeah, I know the issue, I own an HTC Bravo stuck at 2.2.

I could go 2.3 with a custom ROM but I would loose HTC Sense UI.

The new x86 support is pretty interesting. I have an old netbook 
I barely use now, which I could install Android on for experimentation. 
Don't forget x86 with your Android support :)

Well, Android x86 is basically Linux x86, so you should be able to 
already run Red/System binaries on it.

Never mind about the 2.0, even the NDK site lists it an an "other 
platform". I can't remember the last time I saw someone still stuck 
on 2.0.

Integrating with the Android non-application model is the most interesting 
point of running Android on that machine. If I wanted to run Linux 
binaries on it, I could keep Ubuntu on it.

Are you sticking to the ARM5 stuff, or integrating the ARM7 extensions

Having fully access to the whole Android framework from Red is the 
goal. Running Linux binaries is the just the first experimental step.

I will stick with ARMv5 until we rewritte Red/System in Red and add 
a code optimizer. Such optimizer will be able to generate v6 and 
v7 specific code when required.

Android lets you bundle seperate binaries for ARM5 and ARM7 support 
in the same APK. Which binaries get loaded depends on which level 
the phone supports, though if there's no ARM7 binary the ARM7 phone 
can run an ARM5 binary. If you want to do the progressive use of 
ARM7 features if ARM7 is available, it's best to let the APK do it 
for you. I don't think that there are any ARM6 devices for Android, 
especially since the NDK doesn't support them, but if you want to 
add ARM6 support for other platforms then cool.

Well, I am not doing the ARM port only for Android, I target also 
iOS and some embedded boards (like e.g. the Raspberry Pi).

Never mind about what I said about ARM6. Apparently some devices 
were ARM6 but claiming to be ARM7. Progressive support for ARM6 and 
maybe even ARM7 might be a good idea to add to the ARM5 binaries.

BrianH: forget the phones of the past. Noone should care about "most 
phones running 2.2 or below". The release cycle is really fast. I 
would not care for pre 2.3 devices at all, just believe me ....

http://developer.android.com/resources/dashboard/platform-versions.html

2.1: 10.7%
2.2: 40.7%
2.3: 43.9%

Anything else is big waste of time. Just recently, there are two 
top Android phones - Samsung Galaxy SII and HTC Sensation. Both 2.3.4. 
Those are going to be upgraded to ICS. Before you finish the job, 
pre 2.3 falls into absolute irrelevancy, no matter how many tens 
of millions devices out there you claim.

Because only supporting the latest Windows version has worked so 
well for REBOL?

Not supporting phones was part of what killed rebols momentum, imo. 
Being the first alternative is hugely more valuable position than 
being a late coming alternative.

Kaj - you should know, what you are talking about ...

Whether I know what I'm talking about or not makes no difference 
in what people think of me

I think nothing bad of you :-) For me, it is easy - you can't compare 
PC world, which I would assign 3+ years of lifecycle easily, with 
mobile world. In mobile world, I would say it is 2- lifecycle, or 
even shorter. If each day 300K of Android phones is activated, then 
I would pretty much decide to start supporting the almost latest 
models, which is - 2.3. Even my girlfriend HTC Wildfire S, which 
was published on 15.2.2011, is 2.3 version. Before Doc finishes the 
product, it will be old, and unsupported phone by its vendor. Of 
course, it depends upon the featureset you are going to support - 
if supporting pre 2.3 is a no brainer, why not. But - if 2.3 contains 
some real anhancements you want to utilise,then based upon the above 
usagedata, forget at least pre 2.2 ...

Pekr, the top Android phones are the ones people already own, not 
the ones they haven't bought yet. And most of the ones they already 
own (in my country) are bought with 2-year contracts, not qualifying 
for a hardware upgrade until after that, and aren't able to be upgraded 
very much in software because that would compete with new phone purchases. 
It's good to see 2.2 adoption so high though. I am stuck on 2.2, 
btw.

Kaj, when has REBOL only supported the latest version of Windows? 
Even R3 doesn't support features in Windows newer than Win2k.

I thought Petr was exaggerating, so I responded in style :-)

I do think that in practice, REBOL has usually been a Windows-only 
technology. Especially because its biggest draw is the easy GUI, 
and this is not (R3) or not well (R2) supported on anything but Windows. 
And because it still pretends to be cross-platform, there are even 
serious deployment problems on Windows

Though to be fair, most of the deployment problems on Windows (for 
R2) come from it using the registry in a Win9x style.

We're getting a little off-topic here though. Go Red!

Yes, my response was imperfect in that REBOL doesn't support the 
latest Windows well :-/

Doc, that's some amazing progress.

Thanks James.

Sorry if this is off topic, but maybe this is relevant to Red/System:

http://queue.acm.org/detail.cfm?id=2010365

I always liked explicit lengths more than the NULL terminator, but 
Red/System has to interface with C code, so the choice has been made 
there

Interesting read though.

It's a choice we can reconsider once Red/System will be rewritten 
in Red. But we'll probably end up choosing the same option, because 
of the overheads of deviating from the format C libs and OS API expect. 
Anyway, it should be an interesting debate. :-)

Probably the best you could do would be to support both types

Sure, but the biggest issue is having to deal with a length header 
when passing to (and returning from) an external function.

Tamas sent me a link today about a nice little SSL/TLS library (http://polarssl.org). 
The bad thing is that it's GPL, but the license extends to FOSS License 
Exception: http://polarssl.org/license_exception


As I understand it, it would be possible to use it for Red but every 
future Red binary publicly distributed would have to come with also 
the PolarSSL source code and a copy of the GPL library. I think that 
burden would be too high for future Red corporate users. What do 
you think?

Isn't it possible to use similar code from PuTTY? As I see it, PuTTY 
has better licence.

License: sure MIT is better, but does PuTTY supports SSL? I thought 
it was only doing SSH.

Hm, yeah, I'm not sure. I guess, I had zlib in my mind, which PuTTY 
also do a reimplementation of. I'm not too much into SSH and SSL. 
PuTTY also have code for SFTP, if that helps in any way to make a 
SSL implementation.